深圳市中立信电子科技有限公司

LPC824M201JDH20J

32-bit ARM® Cortex®-M0+ microcontroller; up to 32 kB flash  and 8 kB SRAM; 12-bit ADC; comparator

General description LPC824M201JDH20J

The LPC82x are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC82x support up to 32 KB of flash memory and 8 KB of SRAM.

Features and benefits LPC824M201JDH20J

 System:

 ARM Cortex-M0+ processor (revision r0p1), running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.

 ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).

 System tick timer.

 AHB multilayer matrix.

 Serial Wire Debug (SWD) with four break points and two watch points. JTAG boundary scan (BSDL) supported.

 MTB

 Memory:

 Up to 32 KB on-chip flash programming memory with 64 Byte page write and erase. Code Read Protection (CRP) supported.

 8 KB SRAM.

 ROM API support:

 Boot loader.

 On-chip ROM APIs for ADC, SPI, I2C, USART, power configuration (power profiles) and integer divide.

 Flash In-Application Programming (IAP) and In-System Programming (ISP).

 Digital peripherals:

 High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 29 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programmable open-drain mode, input inverter, and digital filter. GPIO direction control supports independent set/clear/toggle of individual bits.

 High-current source output driver (20 mA) on four pins.

Applications LPC824M201JDH20J

 Sensor gateways  Simple motor control

 Industrial  Portables and wearables

 Gaming controllers  Lighting

 8/16-bit applications  Motor control

 Consumer  Fire and security applications

 Climate control