深圳市中立信电子科技有限公司

PCA85232U/2DA/Q1,0

LCD 驱动器 LCD DRIVER FOR LOW MULTIPLEX RATES

General description  PCA85232U/2DA/Q1,0

The PCA85232 PCA85232U/2DA/Q1,0 is a peripheral device which interfaces to almost any Liquid Crystal Display (LCD)1 with low multiplex rates. It generates the drive signals for any static or multiplexed LCD containing up to four backplanes and up to 160 segments. It can easily be cascaded for larger LCD applications. The PCA85232 is compatible with most microcontrollers and communicates via the two-line bidirectional I2C-bus. Communication overheads are minimized by a display RAM with auto-incremental addressing, by hardware subaddressing, and by display memory switching (static and duplex drive modes).

Features and benefits PCA85232U/2DA/Q1,0

 AEC-Q100 compliant for automotive applications

 Single-chip LCD controller and driver for up to 640 elements

 Selectable backplane drive configuration: static, 2, 3, or 4 backplane multiplexing

 160 segment drives:

 Up to 80 7-segment numeric characters

 Up to 40 14-segment alphanumeric characters

 Any graphics of up to 640 elements

 May be cascaded for large LCD applications (up to 5120 elements possible)

 160  4-bit RAM for display data storage

 Software programmable frame frequency in the range of 117 Hz to 176 Hz; factory calibrated

 Wide LCD supply range: from 1.8 V for low threshold LCDs and up to 8.0 V for

guest-host LCDs and high threshold (automobile) twisted nematic LCDs

 Internal LCD bias generation with voltage-follower buffers

 Selectable display bias configuration: static, 1⁄ 2, or 1⁄ 3

 Wide power supply range: from 1.8 V to 5.5 V

 LCD and logic supplies may be separated PCA85232U/2DA/Q1,0

 Low power consumption, typical: IDD = 4 A, IDD(LCD) = 65 A