- 非IC关键词
深圳市中立信电子科技有限公司
- 卖家积分:营业执照:已审核经营模式:贸易/代理/分销所在地区:广东 深圳企业网站:
http://www.zlxele.com
收藏本公司 人气:838047
企业档案
- 相关证件: 
- 会员类型:
- 会员年限:16年
- 阿库IM:
- 地址:深圳市福田区彩田路彩虹新都大厦彩荟阁7A室
- 传真:0755-23956688
- E-mail:Lee@zlxele.com
您的当前位置:深圳市中立信电子科技有限公司 > 元器件产品
产品信息
功率:7W | 类型:通信IC | 型号:RA07M4047M |
批号:2013+ | 用途:功放 | 品牌:Mitsubishi/三菱 |
是否提供加工定制:否 | 封装:H46S |
RA07M4047M是7-watt RF的MOSFET放大器便携式收音机模块7.2-volt的工作在400-到470-MHz范围.电池可以直接连接到漏极增强型MOSFET晶体管.如果没有门电压(VGG进入=0V),只有一小漏电流排水和输入信号衰减的RF高达60 dB.输出功率和漏电流增加门极电压上升.与周围2.5V(),输出功率和电压门漏电流大幅增加.额定输出功率变在3V(典型值)和3.5V()提供.在VGG=3.5V,的典型栅极电流1 mA.该模块是专为非线性调频调制,但可能也可用于线性调制通过设置静态漏电流随栅极电压和输出功率控制与输入功率.
特征
•增强型MOSFET晶体管(IDD≅0@ VDD=7.2V, VGG=0V)
• Pout>7W @ VDD=7.2V, VGG=3.5V, Pin=50mW
•ηT>40% @ Pout=6.5W (VGG控制),VDD=7.2V, Pin=50mW
•宽带频率范围:400-470MHz
•低功耗控制电流IGG=1mA (typ)在VGG=3.5V
•模块尺寸:30
x 10 x 5.4 mm
•线性操作有可能通过设置静态漏电流随栅极电压和输出功率控制与输入功率
•RA07M4047M-101是RoHS兼容产品.
•RoHS遵守表明该地段后由信“G”扣分
RA07M4047M:
Silicon RF Power Semiconductors RoHS Compliance , 400-470MHz 7W 7.2V, 2 Stage
Amp. For PORTABLE RADIO
DESCRIPTION
The RA07M4047M is a 7-watt RF MOSFET Amplifier Module for 7.2-volt portable radios that operate in the 400- to 470-MHz range.The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output
power and drain current increase as the gate voltage increases.With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power
becomes available at 3V (typical) and 3.5V (maximum). At VGG=3.5V, the typical gate current is 1 mA.This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power.
The RA07M4047M is a 7-watt RF MOSFET Amplifier Module for 7.2-volt portable radios that operate in the 400- to 470-MHz range.The battery can be connected directly to the drain of the
enhancement-mode MOSFET transistors. Without the gate voltage (VGG=0V), only a small leakage current flows into the drain and the RF input signal attenuates up to 60 dB. The output
power and drain current increase as the gate voltage increases.With a gate voltage around 2.5V (minimum), output power and drain current increases substantially. The nominal output power
becomes available at 3V (typical) and 3.5V (maximum). At VGG=3.5V, the typical gate current is 1 mA.This module is designed for non-linear FM modulation, but may also be used for linear modulation by setting the drain quiescent current with the gate voltage and controlling the output power with the input power.
FEATURES
• Enhancement-Mode MOSFET Transistors(IDD≅0 @ VDD=7.2V, VGG=0V)
• Pout>7W @ VDD=7.2V, VGG=3.5V, Pin=50mW
• ηT>40% @ Pout=6.5W (VGG control), VDD=7.2V, Pin=50mW
• Broadband Frequency Range: 400-470MHz
• Low-Power Control Current IGG=1mA (typ) at VGG=3.5V
• Module Size: 30 x 10 x 5.4 mm
• Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output powerwith the input power RoHS COMPLIANCE
• RA07M4047M-101 is a RoHS compliant products.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts.How ever,it applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes.
2.Lead in electronic Ceramic parts.
• Enhancement-Mode MOSFET Transistors(IDD≅0 @ VDD=7.2V, VGG=0V)
• Pout>7W @ VDD=7.2V, VGG=3.5V, Pin=50mW
• ηT>40% @ Pout=6.5W (VGG control), VDD=7.2V, Pin=50mW
• Broadband Frequency Range: 400-470MHz
• Low-Power Control Current IGG=1mA (typ) at VGG=3.5V
• Module Size: 30 x 10 x 5.4 mm
• Linear operation is possible by setting the quiescent drain current with the gate voltage and controlling the output powerwith the input power RoHS COMPLIANCE
• RA07M4047M-101 is a RoHS compliant products.
• RoHS compliance is indicate by the letter “G” after the Lot Marking.
• This product include the lead in the Glass of electronic parts and the lead in electronic Ceramic parts.How ever,it applicable to the following exceptions of RoHS Directions.
1.Lead in the Glass of a cathode-ray tube, electronic parts, and fluorescent tubes.
2.Lead in electronic Ceramic parts.
ORDERING
INFORMATION:
ORDER
NUMBER:RA07M4047M-101
SUPPLY
FORM:Antistatic tray,50 modules/tray